Nora NUTP10 CCT LED Tape Light Components

Product Features

• 2″, 6”, 8”, 18”, 36”, and 72” interconnection cable: allows for the linking of any two CCT Tape Light runs in any direction. Interconnection cables can be joined together for various lengths. Interconnection cables can also be used to extend Power Line Interconnectors.
• 12” Power Line Interconnector Cable: The 12″ power line interconnector cable allows for easy connection to any CCT controller. NARGB-710 is included and connected with each CCT Tape Light roll. Power Line interconnector cables are used for separated tape light rolls or sections to be installed in different locations. Use interconnection cables to extend length.
• “Y” & “X” Splitter Cables: Splits the connection from one Tape Light or Driver onto two or three separate Tape Lights depending on which one you purchase.
• CCT Touch Pad Wall Controller: Is a Local control of CCT, on/off with memory and dimming & requires 24V LED driver.
• 24V CCT Controller: CCT Color Tuning Controller which is a 12-24V controller and is required for each CCT LED Tape Light run. Installs between the driver and the power line interconnector. Requires Hand Held Remote for CCT Controller.
• Hand Held Remote for CCT Controller: Used to program CCT tape light to certain color configurations. Can be used up to 90’ from CCT controller, must be in direct view. Can be used to control four controllers simultaneously. Requires a 24V CCT Controller.
• 24V 24W Plug-In LED Driver: 24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Non-Dimmable
• 24V 45W Direct Plug-In Driver: 24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Non-Dimmable.
• 24V 96W Class II Rated Plug-In LED Driver: 24V plug-in driver to be used with Nora Lighting’s 24 Volt systems. Direct connection to a wall outlet. Non-Dimmable.